Fero A4001 Plus Firmware

Directly download Fero A4001 Plus Stock Firmware / Flash File, >>>>>>>>>>>
SP7731CEB_A4001_6.0_MIDCOM_A4001_V02_Africell_20170120_Fero_A400
SP7731CEB_A4001_6.0_MIDCOM_A4001_V02_MTN Uganda_20170120_Fero_A400

If you have Software issues with Fero A4001 Plus, I am going to show you how you can bring it back to life with the official stock ROM from the below download link.
to get started, let’s look at what it is capable of Fully repairing your device.
This File is Strictly For Fero A4001 Plus only
IT WILL FIX THE FOLLOWING:
1.Recovery
2.Hung on Logo
3.Pattern Lock
4.Password
5.Pin
6.Boot loop
7.Invalid IMEI
8.Dead Boot
9.FRP
MODEL: Fero A4001 Plus
CPU: SPD 
ANDROID:6
SIZE:1.0GB
USE CM2SP2

PAID 3$

LINK

                                               How to Install Fero A4001 Plus Firmware:

Step 1. Install Spreadtrum Drivers.
Step 2. Install the SPD Download Tool./ CM2 SPD.
Step 3. Open the Research download tool > bin folder.
Step 4. Launch Research Download.exe/ CM2 SPD
Step 5. Click on the Load Packet icon
Step 6. In the window that pops up, navigate to the location of the Fero A4001 S109 firmware.PAC file From the Link Below, select it then click Open.
Step 7. The PAC file should now be loaded
Step 8. Click the Settings Icon/RESEARCH DOWNLOAD
Step 9. In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files.
Step 8. Click the Start downloading button.
Step 9. You should see Waiting…. under the Progress bar.
Step 10. Switch off the phone then connect it to the PC via USB cord, press the volume down key, and put the charged Battery, and flashing should begin. DO NOT interrupt.
Step 11. Once flashing is complete, you’ll see Passed.
step 12. remove the USB cable .done……
ENJOY!